Table of Contents
- Instruction Manual
- Safety Instructions
- Items in this Package
- Specifications
- Product Description
- Initial Setup
- Remote Control
- Setting the Alarm
- Radio Operation
- CD Playback Operation
- Intro Playback
- Programmed Playback
- Bluetooth Operation
- Other Operation
- Aux Input Connection
- Troubleshooting
CROSLEY CR3501A Fleetwood
Instruction Manual
Questions, problems, missing parts?
Before returning to the store, call Customer Service
8 a.m. —6 p.m., EST, Monday — Friday
1-888-CROSLEY
www.crosleyradio.com
Safety Instructions
Read and understand this entire manual before using this product. Keep these
instructions for future reference.
1. Do not use this product near water.
2. This product should be operated only by the type of power source indicated
on the marking label or in this instruction manual.
3. Do not defeat the safety purpose of the polarized plug. A polarized plug has
two blades with one blade wider than the other. This plug will fit into the
power outlet only one way. If you are unable to insert the plug fully into the
outlet try reversing the plug. If the plug should still fail to fit, contact your
electrician.
4. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the product.
5. Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
6. Never push objects of any kind into this product through openings as they
may touch dangerous voltage points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any kind on the product.
7. Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
8. Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
9. Do not use attachments not recommended by the product manufacturer as
they may cause hazards.
10. A product and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the product and cart
combination to overturn.
11. Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from overheating. Do not
block or cover these openings.
12. Unplug the product during lightning storm or when unused for long periods of
time.
Items in this package
Before throwing away any packaging materials, please check thoroughly and
make sure you find the following items that come along with this package:
* Radio
* Remote Control
* Power cord
e 3.5mm aux in cable
FM Wire Antenna
Please contact Crosley customer service if there is any accessory missing from
the package. Retain the original packaging materials for exchange or return
purposes.
Specifications
Power Source AC120V ~ 60 Hz
Power consumption 30wW
Output Power 15W x 2
Frequency Range FM 87.5 – 108.0 MHz
Frequency Response 45Hz — 20KHz
Audio Input Sensitivity 500mV
Dimension 366 x 115×232 mm
Note:
- Design and specifications are subject to change without notice.
- To help save power consumption, some models will comply with ERP energy saving standard. When there is no audio input for 20 minutes, their powers will automatically cut-off. To turn power back on and resume playing, you will need to turn off the power and turn it on again.
Product Description
1. CD Tray
2. Remote Control Sensor
3. Power Button
4. Open/Close Button
5. Function Button
6. Dimmer Button
7. Mode Button
8. Program Button
9. Volume Knob
10.Backward Skip Button
11.Preset Down Button
12. Play/Pause Button
13.EQ Button
14.Forward Skip Button
15.Preset Up Button
16.RCA Jacks
17.FM Wire Antenna
18. Antenna Jack
19.USB Jack (for SERVICE ONLY)
20.Power Jack
- Power Button
- Function Button
- Info Button
- Intro Button
- Stop Button
- Preset Buttons
- Numeric Pad
- Dimmer Button
- Open/Close Button
- Shuffle Button
- Repeat Button
- Mute Button
- Play/Pause/Pair Button
- Skip Button
- Volume Button
- EQ Button
- Bass Button
- Sleep Button
- Clock Button
- Program Button
Initial Setup
Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Connect AC adaptor to the Power Jack of the unit.
3. Connect the supplied FM wire antenna to the ANT. socket on the unit.
4. Untie the FM Antenna and allow it to hang in a straight line.
Remote Control
Prepare the Remote Control
First-time use:
The unit has a pre-installed lithium CR2025 battery. Remove the protective tab to
activate the remote control battery.
Replace the Remote Control Battery
1. Pull out the battery tray and remove the old battery.
2. Place a new CR2025 battery into the battery tray with correct polarity (+/-) as
indicated.
3. Insert the battery tray back into the slot.
Note:
– If the Remote Control is operated near other products which generate infrared rays,
or if other remote control devices using infra-red rays are used near the unit, it may
operate incorrectly. Conversely, the other products may operate incorrectly.
Setting the Alarm
1. In Standby mode, press and hold the Timer/Sleep button on the remote
control until the hour digits flash on the display.
Note: Standby mode is the energy saving mode when the unit is plugged in, but not
turned on for active functions.
2. Press the 
buttons on the remote control or on the unit to adjust the
hour digits, and then press the Timer/Sleep button on the remote control to
confirm, the minute digits will flash on the display.
3. Press the 
buttons on the remote control or on the unit to adjust the
minute digits, and then press the Timer/Sleep button on the remote control to
confirm, the mode will flash on the display.
4. Press 
the buttons on the remote control or on the unit to select:
– FM (to wake to your selected FM Radio Station)
– BUZZER (to wake to a buzzer sound)
– DISC (to wake to your disc music)
5. Press the Timer/Sleep button on the remote control to confirm, the display will
show the volume level.
6. Press the 
buttons on the remote control or on the unit to adjust the
volume, and press the Timer/Sleep button on the remote control to confirm.
The display will show the current time and 
will appear from the display.
Activate and Deactivate the Alarm
– Press the Timer/Sleep button on the remote control to view the alarm settings
or activate the alarm.
– To deactivate the alarm, press the Timer/Sleep two times. The 
will
disappear from the display on the front of the unit.
– To activate the alarm, press the Timer/Sleep two times. The 
will show from
the display on the front of the unit.
Stop Alarm Ring
– When the alarm rings, press the U button on the remote control or on the unit.
The alarm stops but the alarm settings remain.
Radio Operation
Tuning in a Station
Tune in radio stations automatically
– Press and hold the 
buttons, the frequency changes down or up
automatically until a station is found.
Tune in radio stations manually
– Press the 
buttons repeatedly until you find the station you want.
Note:
– The unit is equipped with a FM wire antenna. To FM improve reception, move the
wire around until the reception is clear without interferences. Do not connect the wire
to any additional antenna.
Auto Scan and Save Preset Station
1. Press the 
button on the main unit or press the FM button on the remote
control to select FM mode.
2. Press and hold the PROG button on the remote control to activate automatic
programming. All available stations are programmed in the order of waveband
reception strength.
Tune to a Preset Radio Station
– Press the PRESET buttons to select a preset that you want.
Presetting Stations Manually
You can preset up to 30 FM stations.
1. Tune in the desired station, then press the PROG button.
2. Press the 
or number (0-9) buttons to select the preset number.
3. Press the PROG button to store the station.
4. Repeat above steps 1 to 3 for each station you want to store in memory with
a preset number.
Set the Sleep Timer
1. Press the TIMER/SLEEP button on the remote control repeatedly to select
your desired number of minutes. The number of minutes shown will display in
this sequence:
SLEEP 90 
SLEEP 60 
SLEEP 30 <—IMG